QM30 Automatic Air Leakage Tester
Application: |
For testing sealing conditions between cap and container. |
Functions: |
Removing battery to the table and position(Fully automatic machine adopts automatic position, rollers conveying, and automatic testing).Step on pedal switch for the first time to inflate prepared battery to test the sealing of partitions, when inner air-pressure reaches set upper-limit, inflation will automatically stop and equipment will keep the air pressure for a while, if air pressure falls below set lower-limit within preset time, testing result will come out that sealing level between case and cover or partition does not meet requirement and then alarm. If the first testing-result is qualified, a second inflation is needed to test the sealing of other partitions and whole cover with case, only two testing results are OK, gas tightness between case, cover and partitions can be judged as qualified. Water bath test function is optional feature and it can greatly improve the testing efforts. |
Features: |
This machine has following advantages: High precision of control and good stability in testing. Air leakage voltage can be precisely tested by computer, and displayed by digit. Combined moulds can be suitable for different types of battery. Applying this equipment can greatly improve production efficiency and qualified rate of products. |
Technical Parameters: |
1. Testing Pressure: 0~100KPa 2. Testing Time: 0~99s adjustable 3. Testing Speed: 100pcs/h
| |
|
|